基于Matlab／Simulink的前起落架摆振动力学模型分析

为了更好地进行起落架摆振动力学特性研究,有必要开展起落架摆振动力学仿真分析。利用Matlab／Simulink建立某型飞机前起落架摆振问题的动力学模型,进行动力学仿真,给出不同速度和防摆阻尼系数下的扭转角、扭转角速度、侧滑角和侧向位移的时间历程曲线,并将五组不同算例的仿真结果与相关文献的结论进行对比,验证了本文仿真模型的正确性。     

Powered-descent trajectory optimization scheme for Mars landing

This paper presents a trajectory optimization scheme for powered-descent phase of Mars landing with considerations of disturbance. Firstly, θ–D$\theta ''–''D$ method is applied to design a suboptimal control law with descent model in the absence of disturbance. Secondly, disturbance is estimated by disturbance observer, and the disturbance estimation is as feedforward compensation. Then, semi-global stability analysis of the composite controller consisting of the nonlinear suboptimal controller and the disturbance feedforward compensation is proposed. Finally, to verify the effectiveness of proposed control scheme, an application including relevant simulations on a Mars landing mission is demonstrated.     

月球着陆器着陆腿非线性有限元建模与仿真

为了准确地预测着陆冲击过程中着陆腿的载荷缓冲和吸能性能用于指导着陆缓冲机构的设计和优化,采用非线性有限元方法进行着陆冲击动力学仿真.建立了单腿着陆冲击有限元模型,采用ABAQUS/Explicit显式动力学程序作为求解器.为提高计算效率,采用了质量缩放技术.对2个单腿着陆冲击工况进行了动力学仿真分析,通过与试验数据的对比证明了分析结果的正确性.分析结果表明:非线性有限元模型可以综合考虑各种非线性因素的影响,能较准确地预测着陆腿着陆缓冲性能;着陆腿的弹性对套筒间的摩擦力有较大的影响,增大着陆腿刚度可以减小摩擦力.     

小型无人机伞降回收运动分析CSCD

针对小型无人机伞降回收的特点,研究了在无人机回收过程中,飞机及降落伞系统的运动轨迹及姿态。通过分析机伞间的力学关系,建立了机伞系统运动模型,并进行了仿真分析,给出了无风情况下回收运动的仿真结果。结果表明,系统能够满足无人机回收要求,可以决定最佳的回收参数,从而得到最优回收轨迹和姿态。     

月球返回再入着陆场位置选择限定因素分析

月球返回再入着陆场不仅影响月-地返回转移和返回再入飞行,同时也影响整个月球飞行任务的规划和设计.文章首先分析了航天器与地-月间的相对位置关系;结合月-地返回转移及返回再入轨道特性,理清了月球、地球着陆场和航天器三者在惯性空间内相对位置的内在约束关系;最后分析并通过仿真研究,明确了制约航天器返回再入着陆场位置选择的限定因...     

舰载机弹射起飞前起落架牵制载荷突卸动力学分析

舰载机弹射起飞过程中,由于牵制载荷突卸而产生的前起落架沿航向的快速振动会给机体结构和设备都带来严重的疲劳问题,为研究该振动现象并提出解决方案,建立了舰载机弹射起飞动力学模型,分析计算了前起落架的受载情况,并详细论述其动力学成因,推导了消除前起落架振动现象的充分必要条件.研究结果表明:牵制载荷沿下扭力臂轴向的载荷分量所造...     

基于齿面摩擦的非对称齿轮支座反力分析

以一对双压力角非对称渐开线直齿减速齿轮机构为研究对象,在考虑齿面摩擦的情况下,通过对轮齿的单双齿啮合情况进行受力分析,建立齿轮支座反力的数学模型,并给出了任意齿间载荷系数下齿轮支座反力波动程度的评价指标.研究表明:齿面摩擦是导致齿轮支座反力波动的影响因素之一;可通过提高齿面加工精度,合理润滑,减小压力角及适当增大驱动轮...     

螺旋锥齿轮齿面误差分析与自动反馈修正

基于齿面检测信息,识别并分析了齿面误差及其影响因素,推导出了机床运动参数与齿面误差的映射关系;开发了齿面误差自动识别系统来自动确定误差类型及机床运动参数修正项;建立了四轴联动数控铣齿机运动修正模型,通过数值优化计算实现了机床运动参数的自动修正,并经由测量加工网络完成了修正参数至数控机床的自动反馈.实验及应用表明,通过齿...     

Control of approach and landing phase for reentry vehicle using fuzzy logic

The reentry vehicle is affected by various disturbances such as a wind gust, atmospheric condition or aerodynamic problems in the approach and landing phase. Therefore it is necessary to design a robust control scheme. This paper presents a control scheme using Mamdani fuzzy PD controller. In this paper, the reference trajectories are generated using geometric parameters for disturbed circumstances with 4 cases: nominal, headwind and tailwind, drag increased case. Then, a Mamdani fuzzy PD controller was designed in this study. Twenty-five rules were applied in the knowledge-based system. The max–min method for a fuzzy inference system and the center-of-mass method in defuzzification were used. Finally, guidance and control simulations are performed for verification of proposed controller using generated reference trajectories. In addition, the Monte Carlo simulation is performed considering various disturbances. The results show that proposed Mamdani fuzzy PD controller has reliability and robustness for control of reentry vehicle with wind disturbance in the approach and landing phases.     

到达时着陆距离评估方法和实例分析

就着陆距离评估的相关定义、相关要求进行了阐述,并以ERJ190为例,给出了到达时着陆距离评估的方法和步骤.